Soldering connector, waterresitant
This solder connector made of a shrinkage tube in Polyolefin has a solder ring filled with flux and is additionally equipped with an inside glue. When heated, the tube shrinks and sets off the inside glue so that two cables are connected inseparably, waterproof and cleanly isolated. The solder ring filled with flux coats the open contacts and thereby provides for the electrical flow and stability.
- Material: polyolefin
- Shrinkage ratio: approx. 3:1
- Application temperature: -55°C to +110°C
- For cables with a cross-section of 0.3 - 0.8 mm²
Applications up to 24V/2A maximum recommended
|Size (L x W x H)||2.5 cm x 0.0 cm x 0.0 cm|