SmartArray L6 LED-Module, 4W, neutralwhite, 4500K
Create your products even more individually and choose from the colour temperatures 2700K, 3000K, 3500K, 4000K, 4500K, 5000K, 5700K and 6500K.
SmartArray LED modules by LUMITRONIX® are perfectly suited for application in industrial areas. Thanks to its ultra slim and compact PCB the module can be used for almost every application and the typical CRI value of 83 makes the colours look particularly natural. The SmartArray was developed especially for the replacement of COB modules. It offers a similar or even better performance, quality of light, manufacturing and a better price with the same dimensions and is compatible with all optics, holders and accessories. Therefore the SmartArray can usually be seamlessly included into the production process without any alterations. Particularly for lamp manufacturers SmartArrays are an excellent replacement for halogen lamps.
- Long life expectancy
- Very slim
- Easy to attach
- With 6 high-quality Nichia LEDs: Nichia NF2L757DR (warmwhite) Nichia NF2W757DR (coldwhite)
- dimensions: 50mm x 7mm x 1,9mm (LxBxH)
|Light colour||Neutral white|
|Life cycle (h) Top Spec |
Life cycle (h)
The main characteristic for semiconductor-illuminants (LEDs) is their long life expectancy — as long as they are operated under very special condition. Unlike ordinary bulbs LEDs do nut suddenly fail, but gradually lose brightness during the course of their lifetime. Depending on the quality of the light-emitting diode this degradation may happen faster or slower.
|Light efficiency (lm/W) Top Spec||120 lm/W|
|Luminous Flux (lm) |
Luminous Flux (lm)
The luminous flux (lumen)
describes the total quantity of light provided (independent of the angle of beam).
|Color temperature (K) |
Color temperature (K)
The temperature of color (°K)
shows a color tendency. This value is often used in order to differentiate between cold and warm white LEDs. As higher the color temperature as colder the white.
|Viewing angle (°) |
Viewing angle (°)
The angle of beam
describes in what angle the light is directed forward.
|Power consumption||4 W|
|Voltage (V) |
The voltage (V)
mentioned can be impressed on the product. If your initial voltage is higher (e.g. Car-voltage or adaptor), then you will need a resistor.
|Size (L x W x H)||5 cm x 1 cm x 0 cm|
- 1 person found the following review helpful
onUsed for a standard lamp conversion from CFL. Worked nicely. Used length of ALI and lamp body as heat sink.Comment Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again