SLV LIPSY 50 S COLOR CONTROL wall and ceiling light RGBW
The RGB SLAVE version of the popular LIPSY ceiling luminaire, available in two sizes, enables the colour light control system of an RGB MASTER variant to be expanded and combined with all articles of the Color Control series. The luminaire has a continuous diffuser made of acrylic glass, which is attached to a steel bracket. Thanks to the integrated power supply unit, the LIPSY ceiling light is ready for direct connection to 230V mains voltage.
- Integrated bulb (non-replaceable)
- Dimensions: 48.5cmx48.5cmx13.5cm
- Connection direct to 230V
- Energy efficiency class: A++ - A
- Living quarters
This product description has been translated by machine. A service from LUMITRONIX to enable the basic understanding of thousands of article texts in different languages.
|Lamp socket||LED integriert|
|Life cycle (h) |
Life cycle (h)
The main characteristic for semiconductor-illuminants (LEDs) is their long life expectancy — as long as they are operated under very special condition. Unlike ordinary bulbs LEDs do nut suddenly fail, but gradually lose brightness during the course of their lifetime. Depending on the quality of the light-emitting diode this degradation may happen faster or slower.
|Light efficiency (lm/W)||75 lm/W|
|Luminous Flux (lm) |
Luminous Flux (lm)
The luminous flux (lumen)
describes the total quantity of light provided (independent of the angle of beam).
|Color temperature (K) |
Color temperature (K)
The temperature of color (°K)
shows a color tendency. This value is often used in order to differentiate between cold and warm white LEDs. As higher the color temperature as colder the white.
|Viewing angle (°) |
Viewing angle (°)
The angle of beam
describes in what angle the light is directed forward.
|Power consumption||46 W|
|Voltage (V) |
The voltage (V)
mentioned can be impressed on the product. If your initial voltage is higher (e.g. Car-voltage or adaptor), then you will need a resistor.
|Size (L x W x H)||14 cm x 49 cm x 14 cm|