Philips myGarden IR-wall light Arbour 6W
Let your wall shine in warm white light
This Philips Arbour LED wall light has 1 warm-white LED set in a modern anthracite coloured luminaire. The housing is made of sturdy die-cast aluminium. Due to its IP44 protection rating, the luminaire is particularly suitable for humid outdoor environments and is protected against splash water. The appealing design attracts attention and provides sufficient brightness with scattered warm white light. The integrated motion detector provides additional comfort in your garden.
- Weatherproof (IP44)
- 1 Warm white LED
- Motion sensor
- incl. Lamp
- Material: Aluminium
This product description has been translated by machine. A service from LUMITRONIX to enable the basic understanding of thousands of article texts in different languages.
|Lamp socket||LED integriert|
|Energy efficiency class Top Spec||A++|
|Life cycle (h) |
Life cycle (h)
The main characteristic for semiconductor-illuminants (LEDs) is their long life expectancy — as long as they are operated under very special condition. Unlike ordinary bulbs LEDs do nut suddenly fail, but gradually lose brightness during the course of their lifetime. Depending on the quality of the light-emitting diode this degradation may happen faster or slower.
|Light efficiency (lm/W)||100 lm/W|
|Luminous Flux (lm) |
Luminous Flux (lm)
The luminous flux (lumen)
describes the total quantity of light provided (independent of the angle of beam).
|Color temperature (K) |
Color temperature (K)
The temperature of color (°K)
shows a color tendency. This value is often used in order to differentiate between cold and warm white LEDs. As higher the color temperature as colder the white.
|Power consumption||6 W|
|Voltage (V) |
The voltage (V)
mentioned can be impressed on the product. If your initial voltage is higher (e.g. Car-voltage or adaptor), then you will need a resistor.
|Size (L x W x H)||7.5 cm x 16.6 cm x 22.1 cm|