Philips MASTER LEDtube Value HO 1500mm 830 InstantFit ro T8
The Master LED Tube by Philips constitutes the fastest and easiest way of saving energy in an environmentally friendly and sustainable manner. The LED Tube convinces by its low maintenance costs thanks to a three times longer life expectancy, as well as a 50% lower energy consumption compared to ordinary luminescent tubes. This new illuminant generates a natural and agreeably white light with a power input of 25W and a 30% higher light yield.
- G13 socket
- Homogenous distribution of light
- No mercury
- Less CO2
- Easy installation within just a few minutes
- Rotating end caps
- Environmentally friendly
- Colour rendering index Ra >80
- Saves up to 50% energy
- 3x longer life expectancy
- Immediate light: no flickering, no buzzing
- No EMV problems thanks to integrated driver
- General lighting
- Corridors and escalators
- Industrial rooms and storage spaces
- Underground car parks and parking structures
- Walk-in freezers of the food industry
- Supermarkets and shops
- Car parks
A detailed installation manual can be found in our download area. Please note that the LED Tube should only be installed by qualified personnel.
Enter the values of your old lamp and calculate how much you can save with Philips MASTER LEDtube Value HO 1500mm 830 InstantFit ro T8
- Total kg of CO2 less
- Amortisation after h
- Calculation basis
Annual savings during LED buld's life time
Power price per kWh: € LED life time: h LED power: W LED price: € Daily hours of service: h
|Bright like (W)||58 W|
|Energy efficiency class||A+|
|Light colour||Warm white|
|Life cycle (h) Top Spec |
Life cycle (h)
The main characteristic for semiconductor-illuminants (LEDs) is their long life expectancy — as long as they are operated under very special condition. Unlike ordinary bulbs LEDs do nut suddenly fail, but gradually lose brightness during the course of their lifetime. Depending on the quality of the light-emitting diode this degradation may happen faster or slower.
|Light efficiency (lm/W) Top Spec||115 lm/W|
|Luminous Flux (lm) |
Luminous Flux (lm)
The luminous flux (lumen)
describes the total quantity of light provided (independent of the angle of beam).
|Color temperature (K) |
Color temperature (K)
The temperature of color (°K)
shows a color tendency. This value is often used in order to differentiate between cold and warm white LEDs. As higher the color temperature as colder the white.
|Viewing angle (°) |
Viewing angle (°)
The angle of beam
describes in what angle the light is directed forward.
|Power consumption||25 W|
|Voltage (V) |
The voltage (V)
mentioned can be impressed on the product. If your initial voltage is higher (e.g. Car-voltage or adaptor), then you will need a resistor.
|Size (L x W x H)||151.0 cm x 2.8 cm x 2.8 cm|