Philips MASTER LEDspot Value 3,7-35W GU10 940 36° DIM
The Philips LED-Retrofit-Spot is perfectly suited for replacing 35W standard bulbs and halogen reflector lamps. Lower your energy costs by up to 80% by using the Master LED Spot by Philips. The spot can be dimmed variably with a homogenous light distribution and thus generates an agreeably white light in your living, office or shop rooms.
- 3.7W replacement for 35W
- 80% energy saving
- Very good colour rendering index (CRI90)
- Variably dimmable (100%-10%)
- Homogeneous distribution of light
- Fast amortisation
- Accent and general illumination
- Illumination of shop windows
- Museums and art exhibitions
- Public buildings
- Hotels und restaurants
- Shops and private apartments
Enter the values of your old lamp and calculate how much you can save with Philips MASTER LEDspot Value 3,7-35W GU10 940 36° DIM
- Total kg of CO2 less
- Amortisation after h
- Calculation basis
Annual savings during LED buld's life time
Power price per kWh: € LED life time: h LED power: W LED price: € Daily hours of service: h
|Bright like (W)||35 W|
|Energy efficiency class||A+|
|Light colour||Neutral white|
|Life cycle (h) |
Life cycle (h)
The main characteristic for semiconductor-illuminants (LEDs) is their long life expectancy — as long as they are operated under very special condition. Unlike ordinary bulbs LEDs do nut suddenly fail, but gradually lose brightness during the course of their lifetime. Depending on the quality of the light-emitting diode this degradation may happen faster or slower.
|Light efficiency (lm/W)||75 lm/W|
|Luminous Flux (lm) |
Luminous Flux (lm)
The luminous flux (lumen)
describes the total quantity of light provided (independent of the angle of beam).
|Color temperature (K) |
Color temperature (K)
The temperature of color (°K)
shows a color tendency. This value is often used in order to differentiate between cold and warm white LEDs. As higher the color temperature as colder the white.
|CRI (Ra) Top Spec||90|
|Viewing angle (°) |
Viewing angle (°)
The angle of beam
describes in what angle the light is directed forward.
|Power consumption||4 W|
|Voltage (V) |
The voltage (V)
mentioned can be impressed on the product. If your initial voltage is higher (e.g. Car-voltage or adaptor), then you will need a resistor.
|Size (L x W x H)||5 cm x 5 cm x 6 cm|