Philips CoreLine LED Downlight, 11W, neutralwhite
Your entry into the world of LED technology - simple and affordable
Are you looking for an innovative lighting solution for a standard use? Are you interested in LED solutions? Have you always used conventional alternatives up to now due to higher investment costs? Then today marks the start of a new chapter for you! Up until now, many of those who were interested in switching to LED technology have been put off by the higher prices compared with halogen solutions. Thanks to the new CoreLine LED recessed spotlights, this is no longer a problem. CoreLine LED recessed spotlights are an affordable solution which makes it possible for everyone to switch to LED technology. Today you can enjoy the same light output you are used to, the only difference being a service life which is 10 times longer.
CoreLine LED recessed spotlights - a clear decision in favour of LED
The quality and light output of the CoreLine LED product family makes it possible in most cases to replace conventional luminaires 1:1. The luminaire present is simply removed and the innovative CoreLine luminaire installed. Expensive renewal of cabling and new ceiling configurations are not necessary.
- Colour white
- Payback period of approx. only 8 months
- Energy savings of up to 75% compared with low-voltage halogen recessed spotlights (50 W)
- Dimmable (phase / step)
Areas of use
- Cafés and restaurants
- Representative reception and waiting areas
- Office buildings
- Doctors’ practices or hospitals
|Lamp socket||LED integriert|
|Light colour||Neutral white|
|Life cycle (h) Top Spec |
Life cycle (h)
The main characteristic for semiconductor-illuminants (LEDs) is their long life expectancy — as long as they are operated under very special condition. Unlike ordinary bulbs LEDs do nut suddenly fail, but gradually lose brightness during the course of their lifetime. Depending on the quality of the light-emitting diode this degradation may happen faster or slower.
|Light efficiency (lm/W)||60 lm/W|
|Luminous Flux (lm) |
Luminous Flux (lm)
The luminous flux (lumen)
describes the total quantity of light provided (independent of the angle of beam).
|Color temperature (K) |
Color temperature (K)
The temperature of color (°K)
shows a color tendency. This value is often used in order to differentiate between cold and warm white LEDs. As higher the color temperature as colder the white.
|Viewing angle (°) |
Viewing angle (°)
The angle of beam
describes in what angle the light is directed forward.
|Power consumption||11 W|
|Voltage (V) |
The voltage (V)
mentioned can be impressed on the product. If your initial voltage is higher (e.g. Car-voltage or adaptor), then you will need a resistor.
|Size (L x W x H)||6.0 cm x 9.5 cm x 0.0 cm|