Philips CoreLine Downlight 11W, 840, adjustable electronic ballast, white
The CoreLine LED recessed spotlights convince not only with their elegant design, but also with their high energy savings compared to halogen solutions. Be inspired by the attractive price-performance ratio.
With the Philips CoreLine LED recessed spotlight, you get a compact and flat product that is easy to install in ceilings with little space. Benefit from up to 80% energy savings compared to recessed spotlights with 50 W low-voltage halogen lamps (system power with transformer: 55 W) and a service life 16 times longer than conventional recessed halogen lamp recessed spotlights. Choose between LEDs in warm white (3,000k) or neutral white (4. 000k) Light colour
- Very good color rendition
- depth 56mm, outside diameter 95mm, installation depth 60mm, installation diameter 78mm .
- Color: White
- rigid execution
- Easy and fast mounting
- Easy electrical connection with plug connection terminal
- Adjustable electronic control gear (PSR)
- Cafes and restaurants
- Representative reception and waiting areas
- Office buildings
- doctor's offices or hospitals
- usable life L90B50 = 15,000 hours .
- usable life L80B50 = 30,000 hours .
- usable life L70B50 = 50,000 hours .
This product description has been translated by machine. A service from LUMITRONIX to enable the basic understanding of thousands of article texts in different languages.
|Lamp socket||LED integriert|
|Energy efficiency class Top Spec||A++|
|Light colour||Neutral white|
|Life cycle (h) Top Spec |
Life cycle (h)
The main characteristic for semiconductor-illuminants (LEDs) is their long life expectancy — as long as they are operated under very special condition. Unlike ordinary bulbs LEDs do nut suddenly fail, but gradually lose brightness during the course of their lifetime. Depending on the quality of the light-emitting diode this degradation may happen faster or slower.
|Light efficiency (lm/W)||60 lm/W|
|Luminous Flux (lm) |
Luminous Flux (lm)
The luminous flux (lumen)
describes the total quantity of light provided (independent of the angle of beam).
|Color temperature (K) |
Color temperature (K)
The temperature of color (°K)
shows a color tendency. This value is often used in order to differentiate between cold and warm white LEDs. As higher the color temperature as colder the white.
|Viewing angle (°) |
Viewing angle (°)
The angle of beam
describes in what angle the light is directed forward.
|Power consumption||11 W|
|Voltage (V) |
The voltage (V)
mentioned can be impressed on the product. If your initial voltage is higher (e.g. Car-voltage or adaptor), then you will need a resistor.
|Size (L x W x H)||6.0 cm x 9.5 cm x 0.0 cm|