• Home
  • BacklightMatrix white 24V, 290x203, 70 Nichia LEDs

BacklightMatrix white 24V, 290x203, 70 Nichia LEDs

Optimised for advertising & light ceilings, highest system efficiency
incl. Tax. excl. Delivery
  • €37.90 10 pcs
  • €27.91 50 pcs
Out of stock


Technical details

SKU 52786
Brand Lumitronix
Light colour White
Manufacturer code 52786
Power consumption 16 W
Height (cm) 20 cm
Length (cm) 29 cm
Width (cm) 0 cm
CRI (Ra) 85 Ra
Color temperature (K)
Color temperature (K)
The temperature of color (°K)
shows a color tendency. This value is often used in order to differentiate between cold and warm white LEDs. As higher the color temperature as colder the white.
5,000 K
Current (mA)
Current (mA)
The typical currency (mA)
is the currency, which creates the highest performance on your product, without damaging it. If the current will be decreased, also the performance of your product decreases. At high current the performance can as well increase, however the life duration decreases or the product will be destroyed. Therefore we do not recommend this.
650 mA
Light Efficiency Typ. (lm/W) 110 lm/W
Light efficiency (lm/W) 110 lm/W
Luminous Flux (lm)
Luminous Flux (lm)
The luminous flux (lumen)
describes the total quantity of light provided (independent of the angle of beam).
1,750 lm
Viewing angle (°)
Viewing angle (°)
The angle of beam
describes in what angle the light is directed forward.
Voltage (V)
Voltage (V)
The voltage (V)
mentioned can be impressed on the product. If your initial voltage is higher (e.g. Car-voltage or adaptor), then you will need a resistor.
24 V

BacklightMatrix white 24V, 290x203, 70 Nichia LEDs

The DIN A4 large BacklightMatrix is perfectly suited for large-scale illumination, for example advertising signs, light boxes or lit ceilings. In each module 70 Nichia LEDs of the 757 series generate almost 1750lm or rather 30,000 lm targeted light per m2. With a module efficiency of more than 110 lm/W the BacklightMatrix exceeds the customary T8 or T5 fluorescent tubes by far.

The brightness of the light emitting diodes was chosen in a way that the BacklightMatrix can easily replace densely packed fluorescent tubes – without dazzling.

The BacklightMatrix can be connected without soldering with homogeneous LED distances horizontally and vertically to surfaces of any size. Easy installation, efficiency and the very long life expectancy considerably reduce the costs compared to fluorescent tubes, particularly in applications with permanent operation. The BacklightMatrix does not require cooling. The connecters are recommended just for the mechanical join of several segments, they do not set up an electrical contact.

49 or optionally 70 LEDs of the 757 series bestow the BacklightMatrix its extraordinary efficiency. This new 0.2 W LED provides a high CRI value of 85 and an excellent price-performance-ratio. These characteristics make the BacklightMatrix perfectly suited to meet even the highest requirements of the advertising and lighting industry.


  • highest system efficiency
  • optimised for advertising & light ceilings
  • particularly good colour rendering
  • easy installation
  • 5-years-warranty
  • no cooling required
  • dimmable (PWM)


  • Operating instruction for Board Strip Connector


You're reviewing: BacklightMatrix white 24V, 290x203, 70 Nichia LEDs
Click on stars to rate

Why we are the right partner for you


    Payment methods:

    pay-palvisamastercardamerican expresssofortAmazon Pay

    Made in Germany

    Questions or help: Tel. 07471 / 960141-0