ADJ VPAR PAK LED PAR set
The VPar Pak from ADJ is a set for a compact, flat LED jug with two VPAR LED jugs, a padded case for mobile use and a wireless IR remote control. The LED jugs have 5 LEDs with 4 watt each (red, green, blue and amber), a mounting bracket, rubber feet for use as ceiling floodlights and a 4-button DMX display.
The VPar has been developed for ceiling and stage lighting and enhances your event with breathtaking lighting. This device is designed to be placed directly on the floor or integrated into a scaffolding element without mounting brackets, since the inputs and outputs for power and DMX are not located on the rear, but on the side.
The VPars offer smooth RGBA colour mixing, have a 40° beam angle, 15 built-in colour macros, 5 operating modes (including DMX, music control and master/slave), and it is equipped with 8 DMX channel modes so you can use a variety of program options. As an operator, you can also use the enclosed ADJ RC2 wireless LED IR remote control to control the colours and functions of the LED jug.
- Ultra-bright, slim and flat black PAR jug with five 4-in-1-QUAD LEDs with 4 Watt (RGBA) - does not cast RGB shadows .
- Smooth RGBA color mixing (fast or slow color change mode)
- Unique, flat design: Inputs and outputs for power and DMX are intelligently located, so the unit can be placed directly on the floor or integrated into a scaffolding element .
- Perfectly suitable as wall wash or for stages where conventional lighting technology radiates a lot of heat to the actors
- 8 DMX channel modes: 1,2,3,4,5,6,7 or 8 channels .
- 5 operating modes: RGBA dimmer, music control, static color, auto- (3 auto run modes), DMX control mode .
- Digital DMX display with 4-button menu for easy navigation .
- Stand-alone or Master/Slave configuration
- beam angle: 40°
- 15 integrated color macros (color tones)
- DMX-512 Protocol
- Stroboscopic Color Effect
- connection via 3-pin XLR cable
- electronic dimming: 0– 100%
- Including mounting bracket for attachment to scaffolding elements, the wall or on the floor .
- long LEDs (50,000 operating hours)
- power consumption: max. 21W .
- IEC input and output for alternating current in series connection on the side of the device (connects up to 30 devices)
- Compatible with the wireless IR remote control LED RC2 from ADJ with up to 10m range (included in the set)
- switching power supply: AC 100V-240V / 50/60 Hz
- dimensions (L x W x H): 225 x 220 x 85mm
- Weight: 1,2kg
- internal dimensions of VPAR case for on the go (L x W x H): 225 x 200 x 240mm
- system weight: 3kg
Content of sets:
- 2x VPAR LED
- 1x padded case for travelling 1
- 1x wireless remote control RC2 from ADJ RC2 LED IR wireless remote control
This product description has been translated by machine. A service from LUMITRONIX to enable the basic understanding of thousands of article texts in different languages.